Skip to header Skip to content Skip to footer
See content specific to your location.
Continue

VELCRO® Brand ONE-WRAP® 888 Fasteners for Data Center Cable Management

Dense racks, changing connections, and sensitive cabling make data center cable management an ongoing part of network operations. VELCRO® Brand ONE-WRAP® 888 fasteners provide a reusable, adjustable way to bundle and organize cable runs without creating a permanent closure.

Request Info

Whatever your requirements are, we will work closely with you to develop a unique, optimized solution.

Reusable Cable Management for Data Center Environments

The hook and loop design opens without cutting tools. Teams can adjust a bundle as equipment, ports or pathways change, then re-engage the same fastener. This flexibility supports routine moves, adds and changes (MACs), while keeping infrastructure accessible for service and expansion.

REQUEST PRODUCT INFORMATION

Explore this guide:

  1. Key Cable Management Benefits
  2. Product Construction and Performance
  3. How to Measure, Cut and Install
  4. VELCRO® Brand ONE-WRAP® 888 Fasteners vs. Plastic Cable Ties

Key Cable Management Benefits

VELCRO® Brand ONE-WRAP® 888 fasteners support organized pathways while keeping cable access simple. Their reusable, tool-free design lets installers add, remove or reposition cables without cutting off a single-use tie. The soft fastening surface helps limit concentrated pressure on fiber-optic and copper data cables, which can reduce the risk of cable deformation, signal problems and rework caused by excessive tension.

Supporting Moves, Adds and Changes

Data center networks rarely stay fixed. New hardware, added capacity, equipment replacement, and service work can all change the way cables are routed. Reusable fastening lets technicians open a bundle, make the required change, and close it again without cutting away the fastener.

That adjustability makes VELCRO® Brand ONE-WRAP® 888 fasteners useful for MACs in racks, cabinets, and other cable management areas. Teams can reposition the fastener as bundle size changes, which keeps access simple during network expansion and scheduled maintenance.

Cable Routing Best Practices

Proper cable routing helps maintain organized pathways while protecting sensitive data cabling. When securing bundles with VELCRO® Brand ONE-WRAP® 888 fasteners, installers should maintain the bend radius specified by the cable manufacturer and use only the tension needed to hold cables in place.

Fastener placement should also work with the project’s racks, trays and pathways without restricting access or placing unnecessary pressure on cables. Following the facility’s routing, support and labeling requirements helps create a consistent cable management system that remains practical as infrastructure changes.

Protecting Fiber-Optic and Data Cables

Fiber-optic cables can be sensitive to excess pressure, which may affect signal performance. VELCRO® Brand ONE-WRAP® 888 fasteners provide an adjustable hook and loop closure that helps installers secure cable bundles without the concentrated pressure associated with overtightened rigid ties.

The soft, non-abrasive material also helps protect delicate cabling from hard edges. Installers can adjust the closure to accommodate the bundle while following cable manufacturer requirements for tension, bend radius and support.

VELCRO® Brand ONE-WRAP® 888 Product Construction and Performance

VELCRO® Brand ONE-WRAP® 888 fasteners use a polyethylene hook and nylon loop construction that is directly laminated. The back-to-back hook and loop surfaces wrap around a cable bundle and engage with themselves.

VELCRO® Brand ONE-WRAP® 888 fasteners have a nominal peel strength of 0.5 PIW, a shear strength of 23 PSI, and a durable long-term reusable fastening performance that maintains closure integrity through repeated use1. These performance values can help specifiers compare the product with project requirements and other cable management options.

Sizes, Colors, Roll Options and Ordering Information

VELCRO® Brand ONE-WRAP® 888 fasteners are available in:

  • 5-yard rolls, 25-yard rolls and 200-yard spools
  • 3/8” ➞ 1” widths
  • Black, white, royal blue, red, lemon, coachman green, adamia, fiber optic orange, fiber optic blue, fiber optic pink, fiber optic green and fiber optic yellow.
Request Sample or Quote

How to Measure, Cut and Install

The basic application method is simple: bundle, wrap and fasten.

  1. Arrange cables into a smooth bundle without sharp bends or crossed runs.
  2. Measure enough material to wrap the bundle and provide secure overlap in accordance with applicable BICSI guidance. TIP: Leave extra overlap when future cable additions are expected.
  3. Cut roll material to length with scissors.
  4. Wrap the fastener around the bundle without pulling tightly against the cables.
  5. Press the hook and loop surfaces together. Check that the bundle is supported without excess compression.

To make a change, peel the closure open, add or remove cables and re-engage the fastener. No tensioning tool is needed.

Installation Best Practices

  • Select a width that fits the cable bundle and installation.
  • Use enough overlap for firm engagement in accordance with applicable BICSI guidance.
  • Avoid overtightening fiber-optic, copper data and other pressure-sensitive cables.
  • Follow cable-manufacturer bend-radius limits and project support-spacing requirements.
  • Test the product in the end-use application when static discharge is a concern.

Application Overview

  • Racks and cabinets: Organize cable bundles while preserving access for service.
  • Cable trays and pathways: Group related runs and support clear routing.
  • Patch panels and network areas: Use color options to support the site identification plan.
  • Expansion and maintenance: Reopen bundles during MAC work without cutting away the fastener.

Application Considerations

Store the product at 65°F to 75°F, with relative humidity between 40% and 65%.

Extended water exposure may reduce closure performance, though performance may return after the fastener dries.

The product has not been tested for resistance to gasoline, motor oil, transmission fluid, autoclaving, gas sterilization or steam sterilization.

Confirm suitability for the intended application before use.

VELCRO® Brand ONE-WRAP® 888 Fasteners vs. Plastic Cable Ties

VELCRO® Brand Hook & Loop

  • Open, reposition and reuse
  • Tool-free opening
  • Adjustable fastening surface
  • Supports repeated MAC work

Plastic Cable Ties

  • Typically cut off for removal
  • Removal generally requires a cutting tool
  • Can place concentrated pressure if overtightened
  • Usually replaced after removal

Frequently Asked Questions

Hook and loop fasteners provide an adjustable closure that can be reopened without cutting.

This supports maintenance, cable additions and reconfiguration while helping installers control bundle pressure.

Yes. VELCRO® Brand ONE-WRAP® 888 fasteners are reusable and adjustable. The closure can be opened, repositioned and re-engaged as bundle size or routing changes during MAC, maintenance, or other system updates.

Yes. The product is designed for cable management applications that include delicate fiber-optic cabling. Installers should avoid excess tension and follow the cable manufacturer’s bend-radius and support requirements when securing fiber.

Standard tape widths are 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 1 inch, with 25-yard rolls and 200-yard spools. Standard strap formats include 3/4-inch widths in 6-inch, 8-inch and 12-inch lengths. Additional configurations are available upon request. VELCRO® Brand ONE-WRAP® 888 is available in a wide range of colors for cable grouping and identification.

VELCRO® Brand ONE-WRAP® 888 fasteners are adjustable, reusable, and removable without cutting. Conventional plastic cable ties are typically single use and can place concentrated pressure on a bundle if pulled too tightly. The best choice depends on the application and project requirements.

No. VELCRO® Brand ONE-WRAP® 888 fasteners are not plenum rated. Applications that require a UL-certified plenum-rated fastener should use VELCRO® Brand ONE-WRAP® 889 FR fasteners.

Product Support, Samples and Next Steps

Velcro Companies provides product information and technical guidance for teams evaluating VELCRO® Brand ONE-WRAP® 888 fasteners for data center cable management. Contact us for product-specific technical data, available formats, part-number information, samples, or help with an application question.

Request product samples

1All data is for reference only. For proper use please contact us for the product specific Technical Data Sheet.